How do I only focus on the property I am interested in?
I found this to be the most difficult problem. With houses packed so close together, it is almost impossible to not get other houses in your shot. However, you should make sure that you remove other properties as much as possible, as they are not your subject of interest, and will only detract from the property you are trying to showcase. Here are some general tips that will help you:
- Plan your shoot before you get there. Check out the home on Google Maps before you get there. See just how close the surrounding properties are. This will help you determine your video sequence before you get there, saving yourself time during the actual shoot.
- Does the property have a large backyard? If it does, this could provide you with a lot of real estate (pun intended) for you to do flyovers of the house and not fly over nearby properties.
- Is there a long driveway to the house? If so, this could provide with a nice shot leading up to the house, which can give a potential buyer a sense of what driving up to the home would look like
What camera settings/video settings should I use?
I am not going to dive into this too much, since your actual settings will be very specific to the day of your shoot, but the 2 recommendations I have are this:
- ALWAYS use RAW format. This allows you to edit the video later in your post-processing and adjust colors as necessary.
- I always set the white balance to AUTO. This automatically adjusts if it is sunny, cloudy, etc.
What privacy concerns must be addressed for surrounding properties?
When you are shooting videos in rural areas, you do not have to concern yourself with surrounding properties. You can shoot your video, and not capture any other homes in the process. However, when you are in suburban areas, you will find great difficulty with not capturing other homes. There are 2 main things you can do to only capture your subject property in your videos:
- Plan your video sequence to capture as few properties as possible – This is easier said than done, but you don’t have to worry about editing out other properties during your post-processing if you don’t capture them in the first place. Try to maximize the number of video sequences that only focus on your subject property.
- Edit out other homes in your post-processing – This is probably going to be a necessity whenever shooting videos in suburban areas. The density is such that you will capture other homes during your shoot. When I am editing my videos, I do my best to crop out other properties.
I did the video below for one of my neighbors. Below are some details from the flight
Drone type: DJI Phantom 3 Professional
Total flight time: 15 minutes (1 battery)
White Balance: AUTO
Video format: RAW
Video quality: 4K at 24 fps
Video Editing Software: iMovie
On the Phantom Pilots forum, people often ask what is the best shot sequence for real estate video. Here is what I used for this video. It is by no means the only way to do it, just what I used for this one.
- Forward flyover
- Upward spiral directly over house
- Flyover from rear of property
- Clockwise rotation around house
- Counterclockwise rotation around house
- 2nd forward flyover
- Ending shot with drone settling in front of house
A mistake I used to make in my videos is making individual clips too long. It is helpful to start your video with a flyover with some distance from the actual house, but don’t make it too long. Now, I generally try to keep my individual clips between 8-10 seconds.
Okay, here is my actual video. Feel free to leave comments on the video, and give suggestions on how to improve the video. See you next time!